The only Argentine manufacturer of certified dielectric mats — IRAM License in force
Verkom
Drive drum lagging

Rubber lagging for drive drums and industrial rollers

We manufacture the rubber used to line drive drums, rollers and pulleys: eight compounds formulated for the agent, temperature and load of each application, 1 to 51 mm thick and in rolls of up to 3,000 kg.

Depending on the industry, they are also called drive pulleys, drive cylinders, head pulleys or drive rollers.

Conveyor drums and rollers in service
ASTM D 2240Shore A hardness
ISO 4649Abrasion resistance

Choose your compound

The eight products, sorted by the service they are designed for. Each one with its PDF datasheet.

All
By contact
By hardness

When you tap a filter, the table narrows down to the matching products.

ProductBase polymerShore A hardnessColorServiceTensile strengthElongationAbrasionTear strengthDatasheet
Art. 501Natural (NR)40 ±5BlackMaximum elasticity and mechanical strength12 MPa500 %150 mm³10 kN/mView datasheet
Art. 502EPDM80 ±5BlackAcids and alkalis up to 150 °C, peaks of 180 °C13 MPa400 %125 mm³7 kN/mView datasheet
Art. 503Neoprene70 ±5BlackHydrocarbons and weak acids at ambient temperature7 MPa300 %250 mm³6 kN/mView datasheet
Art. 504 NNNatural (NR)70 ±5BlackWater, weak acids and vibration damping4 MPa150 %300 mm³3 kN/mView datasheet
Art. 505 SNNBR80 ±5BlackWater, greases, kerosene and gasoline3 MPa150 %300 mm³3 kN/mView datasheet
Art. 506 NBNatural (NR)50 ±5WhiteWater, weak acids and vibration damping4 MPa150 %300 mm³3 kN/mView datasheet
Art. 507 SBNBR60 ±5WhiteWater, weak acids and hydrocarbons6 MPa150 %300 mm³3 kN/mView datasheet
Art. 508 CarameloNatural (NR)40 ±5CaramelWater, vibration and weathering, with excellent mechanical properties10 MPa300 %300 mm³6 kN/mView datasheet

Abrasion (ISO 4649): how much material is lost in the test. The lower the number, the better the wear resistance. Tensile strength and elongation (ASTM D 412): how much load it takes before breaking and how far it stretches. Hardness (ASTM D 2240): ±5 points tolerance on all products.

What the rubber does on the drum

A lagged drum works differently from a bare one. The rubber layer does four jobs at once.

GripIt creates the friction that drives the belt, paper or sheet metal without slipping.
Core protectionIt shields the metal from water, chemicals and wear, and extends the life of the shaft.
Vibration dampingIt cushions impacts and irregularities and reduces the load on bearings.
Working surfaceIt sets the contact footprint: the pressure with which the roller transfers or presses.

The rubber is chosen on two counts together: the compound, according to what it touches and at what temperature, and the Shore A hardness, according to the contact footprint and load it has to carry. Softer grips and cushions; harder resists wear and pressure.

Rubber roll in the warehouse
Unrolled sheet, smooth surface
Lagged drum
Thickness measurement

How it is supplied

On a roll
Thicknesses from 1 to 51 mm. Widths from 300 to 1000 mm; wider on request. Maximum roll weight: 3,000 kg. Smooth on both faces.
Cut to suit
It is supplied on a roll and the customer cuts it to suit their needs.
Tolerances
thickness: ±0.3 mm from 1 to 3 mm · ±0.5 mm from 3.1 to 10 mm · ±1.0 mm from 10.1 to 51 mm. Width: ±5 mm up to 600 mm and ±10 mm from 601 to 1000 mm.

Where it is used

Any equipment that moves, presses or transfers material over a cylinder.

Mining and aggregatesConveyor drive and tail drums, and pulleys.
Paper and boardDrive, press and reel-guide rollers.
SteelPickling and galvanizing line rollers, in contact with acids.
Food and beverageDrive and conveying drums on wet lines.
Textiles and printingTension, calender and transfer rollers.

Not sure which compound to order? Tell us what the cylinder touches, at what temperature and what load it carries, and we will recommend the product.

Which drum do you need to lag?

Send us these four details and we will tell you which product and thickness to order.

What the drum touchesWater, acids, oils, hydrocarbons, dry material
Working temperatureThe usual one and the maximum it reaches
Drum dimensionsDiameter and face length
What happened to the old laggingWhether it wore out, came loose or was chemically attacked

Frequently asked questions

What hardness is best for a conveyor drive drum?

It depends on the load and the wear it has to withstand. Softer rubber grips the belt better and cushions; harder rubber resists wear and pressure better. Tell us what the drum touches, its working temperature and its dimensions, and we will recommend the product.

What rubber thickness should I order for my drum?

The rubber is made from 1 to 51 mm thick. The right thickness depends on the drum and the service: tell us the diameter, the face length and what happened to the previous lagging, and we will tell you what to order.

What is the difference between a natural and an NBR compound?

Natural rubber (NR) has the highest elasticity and mechanical strength, and works with water, weak acids and vibration. NBR resists greases, kerosene, gasoline and hydrocarbons. If the drum is in contact with oils or fuels, use NBR.

What hardness is best for a conveyor pulley?

The rule is the same as for the drive drum: softer grips and cushions, harder resists wear. Each product in the table shows its Shore A hardness; send us your pulley's details and we will recommend which one to order.

How should the roll be stored until use?

Upright or flat, chocked so it cannot roll, away from direct sunlight and excessive humidity.